GEPRC Cinelog25 - Install BetaFlight; Download driver; Install BetaFlight ground station

Born For FPV
6
/18
Install BetaFlight
The driver must be installed before connecting the flight control to the computer.
MacOS and Linux systems will pre install the required drivers. Windows operating system,
need to manually install the driver.
Download driver:
 CP210x Drivers:
https://www.silabs.com/products/development-tools/software/usb-to-uart-brid
ge-vcp-drivers
 -STM USB VCP Drivers:
http://www.st.com/en/development-tools/stsw-stm32102.html
 -Zadig:
http://zadig.akeo.ie/
Install BetaFlight ground station
Use Betaflight Configurator Software to debug.You need to download the installation
package first
Download Link：
https://github.com/betaflight/betaflight-configurator/releases
Enter the page, pull to the bottom and select the appropriate installation package to
download
 windows system use.exe
 MacOS system use .dmg
 Linux system use .rpm\deb
 Android system use .apk