Class II, Type A2 Biosafety Cabinet
User Manual
4
Installation
The Class II, Type A2 Biosafety Cabinet is ordinarily transported and moved in the upright position. The 3’, 4’ and
6’ units will fit through any opening 32” wide and 58” high. If narrower doors are encountered, the light housing
can be taken off by removing four screws. Alternatively, the viewing panel with the aached light housing can
be completely removed by sliding the split hinges to the right. Removing this panel will reduce the depth of the
biosafety cabinet to 28¾”.
2’ units will fit through any standard doorway.
To Next Page
Loading...
