What to do if Getac M230 Laptop cannot read a disc?
First, make sure the disc is correctly seated in the tray with the label facing up. If it's still not reading, ensure the disc isn't dirty and clean it with a disc cleaning kit. Also, verify that the optical drive driver is correctly installed and that the computer supports the disc or the files contained on it.
Why does my Getac Laptop modem not work?
Make sure that the modem driver is correctly installed and the telephone line is properly connected. Also, verify that the COM port in the communication software is correctly set. Finally, ensure that power management is turned off.
What to do if the external monitor displays nothing when connected to Getac Laptop?
First, ensure that the monitor is turned on and that its signal cable is properly connected. If both are fine, switch the display to the monitor by pressing the Fn+F9 hot key or changing the display settings in Display Properties.
What to do if Getac M230 Laptop keyboard does not respond?
Try connecting an external keyboard to your laptop. If the external keyboard works, it's possible that the internal keyboard cable is loose. In this case, contact an authorized dealer for assistance.
How to improve poor transmission quality on Getac M230 Laptop?
If you are experiencing poor transmission quality, the computer may be out of range, so move it closer to the Access Point or WLAN device. Check for high interference and move the computer away from devices causing radio interference, such as microwave ovens or large metal objects. Plug the computer into a different branch circuit than the affecting device. For further assistance, consult a dealer or experienced radio technician.
What to do if I cannot access the network on my Getac M230 Laptop?
First, make sure that the LAN driver is correctly installed. Next, check that the LAN cable is properly connected to both the RJ-45 connector and the network hub. Verify that the network configuration is appropriate and that the username and password are correct.
What to do if nothing appears on the Getac M230 Laptop screen?
If the power-on indicator isn't lit, check the electrical outlet, plugs, and power cords. If the power button doesn't respond to a light touch, press it firmly. If using battery power, ensure it has a charge and is correctly installed. The screen might be off due to power management; press any key. The brightness might be too low; increase it using the Fn+F6 hot key. The display output might be set to an external device; switch it back to the LCD by pressing Fn+F9 or changing settings in Display Properties. You can also try turning the computer off, waiting a few seconds, and then turning it back on.
What to do if Getac Laptop does not turn on?
If using external AC power, ensure the AC adapter is correctly and securely connected and that the electrical outlet works properly. If using battery power, ensure the battery is not discharged.
General| Category | Laptop |
|---|---|
| Brand | Getac |
| Model | M230 |
| Display Size | 13.3 inches |
| Connectivity | Wi-Fi, Bluetooth |
| Battery Life | Up to 8 hours |
| RAM | 8GB |
| Storage | 256GB SSD |
| Graphics | Intel Iris Xe Graphics |
| Ports | USB, HDMI, Serial Port |
| Ruggedness | MIL-STD-810G, IP65 |
| Durability | vibration and drop resistant |
To Next Page
