Why is the transmission quality poor on my Getac Laptop?
If your computer may be in an out-of-range situation move your computer closer to the Access Point or another WLAN device it is associated with. Check if there is high interference around the environment and solve the problem.
How to fix a Getac Laptop that won't charge?
If the battery does not charge, make sure that the AC adapter is properly connected. Also, ensure the battery is not too hot or cold and allow time for it to return to room temperature. Verify that the battery pack is installed correctly and that the battery terminals are clean.
What to do if I spill water on my Getac Laptop keyboard?
If water or liquid is spilt into the keyboard, immediately turn off the computer and unplug the AC adapter. Then turn the keyboard upside down to drain the liquid out of the keyboard. Make sure to clean up any part of the spill you can get to. Though the keyboard of your computer is spill-proof, liquid will remain in the keyboard enclosure if you don’t remove it.
Why does nothing appear on my Getac V200 screen?
If nothing appears on the screen, press any key to see if the screen comes back, as the screen may have automatically turned off due to power management. The brightness level might be too low, so increase brightness by pressing the Fn+F7 hot key. It's also possible that the display output is set to an external device; to switch the display back to the LCD, press the Fn+F5 hot key or change the display through the settings in Display Properties.
How to resolve radio interference on Getac Laptop?
If radio interference exists, move your computer away from the device causing the radio interference such as microwave oven and large metal objects. Plug your computer into an outlet on a different branch circuit from that used by the affecting device. Consult your dealer or an experienced radio technician for help.
Why are there bad dots on my Getac V200 Laptop display?
A small number of missing, discolored, or bright dots on the screen are an intrinsic characteristic of TFT LCD technology and is not regarded as a LCD defect.
What to do if my Getac V200 Laptop PC card is not working?
If the PC card does not work, ensure that the PC card controller driver is correctly installed and that the PC card is correctly seated. If the card requires an IRQ (Interrupt ReQuest), make sure that there is one available.
Why is my application program not working on my Getac V200?
If the application program does not work correctly, make sure that the software is correctly installed. If an error message appears, consult the software program’s documentation for further information. If you are sure the operation has stop, reset the computer.
What does a hard disk error message mean on my Getac V200 Laptop?
If the hard disk drive error message appears on the screen, the hard disk drive has defects. Ask your dealer for help.
How to fix slow hard disk drive operations on Getac V200?
If the hard disk drive operations seem slow, the data files stored on it may be fragmented. Use a tool such as Window’s Disk Defragmenter to defragment the files.
Procedures for getting the computer ready for operation, including unpacking.
Instructions for connecting the computer to an AC power source for initial startup.
Details on typewriter, cursor, numeric, function, Fn, hot keys, and Windows keys.
Information on using modem, LAN, Wireless LAN, Bluetooth, and WWAN connectivity.
Details on the AC adapter and the computer's rechargeable battery pack.
Explanation of ACPI power management, sleep mode, and hibernation features.
Overview of BIOS setup, including when and how to use it and navigation menus.
Details on Information, Main, Advanced, Security, Boot, and Exit menus in BIOS.
Steps to restore the computer to its factory default settings using System Recovery.
Description of the On Screen Display (OSD) Control Panel and its functions.
Introduction to G-Manager for system, battery, ECO, sensor, ignition, monitoring, and GPS management.
Guide to using the Getac Camera for geo-tagging photos and managing images.
Procedures for getting the computer ready for operation, including unpacking.
Instructions for connecting the computer to an AC power source for initial startup.
Details on typewriter, cursor, numeric, function, Fn, hot keys, and Windows keys.
Information on using modem, LAN, Wireless LAN, Bluetooth, and WWAN connectivity.
Details on the AC adapter and the computer's rechargeable battery pack.
Explanation of ACPI power management, sleep mode, and hibernation features.
Overview of BIOS setup, including when and how to use it and navigation menus.
Details on Information, Main, Advanced, Security, Boot, and Exit menus in BIOS.
Steps to restore the computer to its factory default settings using System Recovery.
Description of the On Screen Display (OSD) Control Panel and its functions.
Introduction to G-Manager for system, battery, ECO, sensor, ignition, monitoring, and GPS management.
Guide to using the Getac Camera for geo-tagging photos and managing images.
To Next Page
General
