Using Getac Software 6-21
Using Getac Camera
Getac Camera is a geo-tagging camera program, which allows you to stamp
geographical information on photos as watermarks and embed such
information into JPEG files as EXIF 2.2 metadata.
NOTE:
Getac Camera works with Virtual-GPS (a separate application
program). Make sure that Virtual-GPS is installed in your computer.
Before starting Getac Camera, close any other program that uses the
camera; otherwise, Getac Camera can only provide limited functions.
The instructions in this document are based on touchscreen operations
though there are equivalent touchpad and mouse operations.
To start the program, tap the Getac Camera program icon on Windows
desktop. The Getac Camera window appears as shown below.
The GPS positioning will be automatically activated. When the GPS
positioning is completed, you will see the geographical information in the
watermark area on the image.
To Next Page
Loading...
Need help?
General
