Getinge Lucea 100 Maintenance Manual

4
Maintenance and inspection procedures
Electrical inspection
26 / 44
Lucea 50_100
01740 EN 01
4.5.1 Functional tests
Fig.32: Turning the lighthead on and off
Turning the lighthead on and off
1. Press the On/Off button to turn on the
lighthead.
Ø All of the LEDS turn on, at the last illu-
mination level used when the light was
turned off.
2. Press the On/Off button again to turn off
the lighthead.
Ø All of the LEDs turn off.
1
2
3
Fig.33: Adjusting the illumination via the keypad
Adjusting the light intensity
1. Press Increase intensity 3 to increase
the light intensity level of the lighthead.
2. Press Decrease intensity 1 to decrease
the light intensity level of the lighthead.
Ø The illumination level on the lighthead
is shown by the LED 2 .
Adjusting the light field diameter
4
Fig.34: Adjusting the light field diameter
Adjusting the light field diameter (on
LUCEA100 only)
1. Turn the handle 4 clockwise to enlarge
the light field or counter-clockwise to re-
duce the light field.

Getinge Lucea 100 Specifications

General

Brand	Getinge
Model	Lucea 100
Category	Medical Equipment
Language	English