Getinge ProSeal Premium - Removing the Base Frame from the Housing

SERVICE MANUAL ProSeal Classic/Plus/Premium
8
2.2 Removing the base frame from the housing
 Disconnect the wiring from the base frame and the control board (Pic 6). Use
special care with the flat cable coming of the display. This cable is easily
damaged.
Pic 6
 Turn the unit on the front side, be careful with the touchscreen! Remove
screws (1) to separate the base frame from the housing (Pic 7). After
removing the screws, turn the sealer back.

Pic 7
1
1
1
Control board
Base frame