Getinge WD15 CLARO - ERROR INDICATIONS; HANDLING ALARMS DISPLAY; SPECIFIC HANDLING ALARM MESSAGES; NOTE ON DETERGENT ALARM RUNS

HANDLING ALARMS
+DQGOLQJDODUPVDSSHDUVRQWKHGLVSOD\LQSODLQWH[W
The machine cannot be started until the error has been corrected.
7KHIROORZLQJKDQGOLQJDODUPVFDQEHGLVSOD\HG
Det 1 low level Empty container alarm 1. If detergent 1 is finished,
a handling code is generated.
The alarm is reset automatically when detergent is added.
Det 2 low level Empty container alarm 2. If detergent 2 is finished,
a handling code is generated.
The alarm is reset automatically when detergent is added.
Det 3 low level Empty container alarm 3. If detergent 3 is finished,
a handling code is generated.
The alarm is reset automatically when detergent is added.
Det 4 low level Empty container alarm 4. If detergent 4 is finished,
a handling code is generated.
The alarm is reset automatically when detergent is added.
Salt level low Salt level in salt container is low. Fill with salt.
The alarm is reset when the salt level is restored.
NOTE:
When the handling alarm Add detergent 1-4 is activated (appears on the display)
there is always enough detergent left for one run; in other words, if you have
started a program it can run to the end.
ERROR INDICATIONS
Red lamp: Alarm indication
Handling alarm or error code
DET 1 LOW LEVEL
<Doc_USR><Doc_503901100><Rel_A><Lang_EN>
Page 18 of 28