ECturn & ECturn Inside
3
Introduction
1 Introduction
1.1 Symbols and illustrations
Warning notices
In these instructions, warnings are used to warn against material damage and injuries.
X
Always read and observe these warning notices.
X
Observe all measures marked with the warning symbol and warning word .
Warning
symbol
Warning word Meaning
CAUTION
Danger to persons.
Non-compliance can result in minor injuries.
Other symbols and means of representation
Important information and technical notes are highlighted to explain correct operation.
Symbol Meaning
means "important note"
means “additional Information”
X
Symbol for an action: This means you have to do something.
X
If there are several actions to be taken, keep to the given order.
1.2 Product liability
In compliance with the liability of the manufacturer for his products as dened in the German “Product Liability
Act”, compliance with the information contained in this brochure (product information and intended use, misuse,
product performance, product maintenance, obligations to provide information and instructions) must be en-
sured. Failure to comply releases the manufacturer from his statutory liability.
1.3. Special cases
In certain cases, such as with
à Special wiring
à special function settings (parameters)
à Special software
dierences from the information given in this user handbook may occur.
X
If this is the case, please ask the service technician responsible.
1.4 Further information
Information about commissioning and service can be found on the following diagrams:
à ECturn / ECturn Inside wiring diagram
à ECturn / ECturn Inside installation instructions
210623_GEZE_ID 196257-00_BHB-ECturn_EN.indd 3 7/18/2021 14:00:29
To Next Page
Loading...
Need help?
General
