GEZE ECturn User Manual

ECturn & ECturn Inside
4
Introduction
1.5 Terms
Term Explanation
Hinge side The side of the door where the hinges from which the door leaf is suspended are located. Usual-
ly that side of the door located in the opening direction.
Opposite hinge side The side of the door facing the hinge side. Usually that side of the door located in the direction
of closing movement.
Contact sensors Push button, switch or movement detector for activating the drive unit.
Activation function in the "Automatic" operating mode.
The contact sensor does not have any function in the "Night"/"O" operating mode.
Mechanical
contact (KB)
Access control function (for example key switch or card reader) used by authorised persons to
activate the drive.
The activation function is active in the "Automatic" and "Night" operating modes.
Contact sensor with
switch function
Push button for opening and closing the door. Activation function only in the “Automatic”
mode of operation. The door is opened automatically when the button is rst pressed and
closed again automatically when the button is pressed the second time. The function can be
activated during commissioning by parameter setting.
Push & Go When the door is pressed manually out of the closing position with an activated Push & Go
function in the "automatic" operating mode, the door opens automatically as soon as a specic
adjustable opening angle is exceeded.
Opening safety indi-
cator (SIO)
Presence detector (e.g. active infrared light sensor) for protecting the swinging range of the
door in the opening direction. As a rule the sensor is located on the hinge side of the door on
the door leaf.
Closing safety indica-
tor (SIS)
Presence detector (for example active infrared light sensor) for protecting the swinging range
of the door in the closing direction. As a rule the sensor is located on the opposite hinge side of
the door leaf.
Stop Self-locking switch with which immediate stopping of the drive unit can be triggered in case
of danger. The drive remains in its current position until the user unlocks the stop switch again,
thus terminating the stop situation.
Electric strike Fail-secure electric strike
Available as AC or DC electric strike version. When the drive unit is activated, the electric strike
is switched on by the control unit of the drive unit provided the door is in the closing position.
The electric strike remains activated until the door has left the closing position.
Fail-safe electric strike
DC electric strike version. The electric strike is switched o when the drive unit is activated pro-
vided the door is in the closing position. The electric strike remains switched o until the door
has left the closing position.
Bolt feedback The bolt feedback function is a contact integrated in the lock latch that is activated when the
door is locked mechanically by the tie bolt of the door lock. It signals to the control unit that the
door is locked mechanically and can therefore not be opened by the drive unit. In this case the
control unit ignores the control activation of all the contact sensors.
210623_GEZE_ID 196257-00_BHB-ECturn_EN.indd 4 7/18/2021 14:00:29

GEZE ECturn Specifications

General

Brand	GEZE
Model	ECturn
Category	Door Opening System
Language	English