Instruction Manual Mitras LX7
EN 2016-12-27 25
If you have ticked the checkbox "Output directly on lamps", you will see how the changed
settings directly affect your connected luminaire(s). The display of the luminaire will now
show "M" for manual lighting.
If you want to change the brightness of the luminaire at this time, enter either the desired
percentage or move the upper slider.
If you want to change the output color of the color channels, you can move them in the
direction of blue or red using a slider. All color channels are automatically changed
accordingly.
More blue:
To Next Page
Loading...
Need help?
General
