Gibertini EU-C LCD - Serial Commands and Control; Maintenance and Care; Cleaning and Periodic Calibration; Product Disposal Information

EU-C “LCD”
ENGLISH
- 35 -
NOTE - If a print is requested, but the weight on the pan is not stable, the balance “saves”
the request, but does not print immediately. As soon as the data is stable, the receipt will
be issued.
7.3 SERIAL COMMANDS
In the “CRYSTAL” and “EURO” protocols the balance responds to the following
commands:
COMMAND
FUNCTION
B
Send data on display
C
Start the calibration process
I
Start continuous transmission of data
F
Stop continuous transmission of data
T
Tare command
Notes : Every remote control command must end with “CR”.
Line-feed characters are ignored.
8. MAINTENANCE
Always keep the pan clean. To clean the balance, do not use solvents or acid or corrosive
substances. Use a soft cloth, made humid, if necessary, with water or non-aggressive
cleansers.
Calibrate periodically the balance with certified masses, especially when the balance is
used intensively, or after long inactive periods. Use only a class F1 certified mass of 1000g
(or multiples).
9. DISPOSAL – INFORMATION FOR USERS
According to the 2011/65/CE and 2003/108/CE Directives,
concerning the reduction in the use of hazardous substances
in electrical and electronic apparatus, as well as the disposal
of waste materials
The symbol of a crossed box applied on the apparatus or on the packaging indicates that the product
must be collected separately from other waste materials at the end of its useful life.
The separate waste collection of the apparatus which has reached the end of its useful life is
organised and managed by the producer. The user who desires to get rid of present apparatus must
therefore contact the seller and follow the given instructions.
Suitable separate waste collection for future sending of the disused apparatus for recycling, treatment
and environmentally friendly disposal, contributes towards preventing any possible negative effects on
the environment and on health and encourages the reuse and recycling of the materials the apparatus
is made of.
Unauthorised disposal of the product by the user will lead to payment of the administrative sanctions in
force in the country were it is put on the market.