Gigabyte MD72-HB2 - Page 40

BIOS Setup - 40 -
Parameter
Description
Serial Port for Out-of-Band
EMS Console Redirection
Settings(continued)

Flow Control EMS
– Flowcontrolcanpreventdatalossfrombufferoverow.When
sending data, if the receiving buffers are full, a 'stop' signal can
besenttostopthedataow.Oncethebuffersareempty,a'start'
signalcanbesenttore-starttheow.Hardwareowcontroluses
two wires to send start/stop signals.
– Options available: None, Hardware RTS/CTS, Software Xon/Xoff.
Default setting is None.