Gigabyte MD72-HB2 User Manual

- 89 - BIOS Setup
2-6 Boot Menu
The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error
messageifthelegacydrive(s)speciedisnotbootable.
Parameter
Description
BootConguration
Setup Prompt Timeout
Number of seconds to wait for setup activation key. 65535 (0xFFFF)
meansindenitewaiting.
Press the numeric keys to input the desired values.
Bootup NumLock State
Enable/Disable the Bootup NumLock function.
Options available: On, Off. Default setting is On.
Quiet Boot
Enable/Disable showing the logo during POST.
Options available: Enabled, Disabled. Default setting is Enabled.
Setup Flash
Press[Enter]torunsetupash.
Dump full Setup Data
Press[Enter]todumpfullsetupdatatole.
Dump non-default Setup Data
Press[Enter]todumpnon-defaultsetupdatatole.
Restore Setup Data
Press[Enter]torestoresetupdatafromle.
Boot mode select
Selects the boot mode.
Options available: LEGACY, UEFI. Default setting is UEFI.

Gigabyte MD72-HB2 Specifications

General

Brand	Gigabyte
Model	MD72-HB2
Category	Motherboard
Language	English