Gigabyte MD72-HB2 - Processor Configuration

BIOS Setup - 58 -
Parameter
Description
ProcessorConguration
Pre-SocketConguration
Press[Enter]tocongureadvanceditems.

CPUSocket0Conguration
– Core Disable Bitmap(Hex)
• Number of Cores to enable. 0 means all cores. FFFFFFF
means to disable all cores. The maximum value depends on
the number of CPUs available. Press the numeric keys to
adjustdesiredvalues.
Processor Socket / Processor
ID / Processor Frequency /
Processor Max Ratio / Processor
Min Ratio / Microcode Revision
/ L1 Cache RAM(Per Core) / L2
Cache RAM(Per Core) / L3 Cache
RAM(Per Package) / Processor
Version
Displaysthetechnicalspecicationsfortheinstalledprocessor(s).
Hyper-Threading [All]
The Hyper Threading Technology allows a single processor to execute
two or more separate threads concurrently. When hyper-threading is
enabled, multi-threaded software applications can execute their threads,
thereby improving performance.
Options available: Enable, Disable. Default setting is Enable.
Hardware Prefetcher
Select whether to enable the speculative prefetch unit of the processor.
Options available: Enable, Disable. Default setting is Enable.
L2 RF0 Prefetch Disable
Options available: Enable, Disable. Default setting is Disable.
AdjacentCachePrefetch
When enabled, cache lines are fetched in pairs. When disabled, only
the required cache line is fetched.
Options available: Enable, Disable. Default setting is Enable.
DCU Streamer Prefetcher
Enable/Disable DCU streamer prefetcher.
Options available: Enable, Disable. Default setting is Enable.
DCU IP Prefetcher
Enable/Disable DCU IP Prefetcher.
Options available: Enable, Disable. Default setting is Enable.
Extended APIC
Enable/Disable extended APIC support. Note: The VT-d will be enabled
automatically when x2APIC is enabled.
Options available: Enable, Disable. Default setting is Disable.
Enable Intel(R) TXT
Enable/Disable the Intel Trusted Execution Technology support function.
Options available: Enable, Disable. Default setting is Disable.
VMX (Vanderpool Technology)
Enable/Disable the Vanderpool Technology. This will take effect after
rebooting the system.
Options available: Enable, Disable. Default setting is Enable.
Enable SMX
Enable/Disable the Safer Mode Extensions (SMX) support function.
Options available: Enable, Disable. Default setting is Disable.
AES-NI
Enable/Disable the AES-NI support.
Options available: Enable, Disable. Default setting is Enable.