Gigabyte MZ72-HB0 - Page 83

- 83 - BIOS Setup
2-3-3-1-1 DRAM Controller Conguration
Parameter Description
DRAMControllerConguration
DRAM Power Options
Press[Enter]tocongureDRAMPowerOptions.

Power Down Enable
– Enable/Disable DDR power down mode.
– Options available: Auto, Enabled, Disabled. Default setting is Auto.
Cmd2T
Selects the Cmd2T mode on ADDR/CMD.
Options available: Auto, 1T, 2T. Default setting is Auto.
Gear Down Mode
Enable/Disable the Gear Down Mode function.
Options available: Auto, Enabled, Disabled. Default setting is Auto.