Gigabyte MZ72-HB2 - Page 97

- 97 -
BIOS Setup
2-3-4-2 NBIO RAS Common Options
Parameter
Description
NBIO RAS Common Options
NBIO RAS Control Options available: Disabled, MCA, Legacy, Auto. Default setting is Auto.
Egress Poison Severity High
CongurestheEgressPoisonHighSeverity.Eachbitsetto1enables
High severity on the associated IOHC egress port. A bit of 0 indicates
LOW severity.
Egress Poison Severity Low
CongurestheEgressPoisonLowSeverity.Eachbitsetto1enablesHigh
severity on the associated IOHC egress port. A bit of 0 indicates LOW
severity.
NBIO SyncFlood Generation
The value may be used to mask SyncFlood caused by NBIO RAS options.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
NBIO SyncFlood Reporting
The value may be used to enable SyncFlood reporting to APML.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
Egress Poison Mask High
Enables mask for masking of errors logged in EGRESS_POISON_
STATUS. For each bit set to 1, errors are masked. For each bit set to 0,
errors trigger response actions.
Egress Poison Mask Low
Enables mask for masking of errors logged in EGRESS_POISON_
STATUS. For each bit set to 1, errors are masked. For each bit set to 0,
errors trigger response actions.