Gigabyte R161-R12 - Page 100

BIOS Setup - 100 -
Parameter
Description
Acoustic Noise Settings
(continued)

Slow Slew Rate for IA/GT/SA Domain
(Note)
– Sets VR IA/GT/SA Slow Slew Rate for Deep Package C
State ramp time. Slow slew rate equals to Fast devided by
number 2, 4, 8, 16.
– Options available: Fast/2, Fast/4, Fast/8, Fast/16. Default
setting is Fast/2.
System Agent VR Settings/
Core/IA VR Settings/
GT-UnSliced VR Settings/
GT-Sliced VR Settings
Press [Enter] to congure advanced items.

VR Cong Enable
– Enable/Disable VR Conguration.
– Options available: Enabled/Disabled. Default setting is
Enabled.

AC Loadline
– Sets a value for AC Loadline which is defined in 1/100
mOhms. A value of 100 equals 1.0 mOhm, and 1255 is
12.55mOhms. The range is 0-6249 (0-62.49 mOhms).
Default setting is 0.

DC Loadline
– Sets a value for DC Loadline which is defined in 1/100
mOhms. A value of 100 equals 1.0 mOhm, and 1255 is
12.55mOhms. The range is 0-6249 (0-62.49 mOhms).
Default setting is 0.

PS Current Threshold1
– Sets a value for PS Current Threshold1 which is dened in
1/4A increments. A value of 400 equals 100A. The range is
0-512 which translates to 0-128A. Default setting is 80 for
20A.

PS Current Threshold2
– Sets a value for PS Current Threshold2 which is dened in
1/4A increments. A value of 400 equals 100A. The range is
0-512 which translates to 0-128A. Default setting is 20 for
5A.

PS Current Threshold3
– Sets a value for PS Current Threshold3 which is dened in
1/4A increments. A value of 400 equals 100A. The range
is 0-512 which translates to 0-128A. Default setting is 4 for
1A.

PS3 Enable
– Enable/Disable PS3.
– Options available: Enabled/Disabled. Default setting is
Enabled.
(Note) This item is available when Acoustic Nosie Mitigation is set to Enabled.