Gigabyte R161-R12 - Page 101

- 101 - BIOS Setup
Parameter
Description
System Agent VR Settings/
Core/IA VR Settings/
GT-UnSliced VR Settings/
GT-Sliced VR Settings
(continued)

PS4 Enable
– Enable/Disable PS4.
– Options available: Enabled/Disabled. Default setting is
Enabled.

IMON Slope
– Sets a value for IMON Slope which is defined in 1/100
increments. The range is 0-200. Default setting is 0.

IMON Offset
– Sets a value for IMON Offset which is defined in 1/1000
increments. The range is 0-63999. Default setting is 0.

IMON Prex
– Sets the offset value as positive or negative.

VR Current Limit
– Sets a value for Voltage Regulator Current Limit. The value
represents the maximum instantaneous current allowed at
any given time.The value is represented in 1/4A (Ampere)
increments. A value of 400 equals 100A. Default setting is 0.

VR Voltage Limit
– Sets a value for VR Voltage Limit which is dened in mV.
The range is 0-7999mV, Default setting is 0.

TDC Enable
– Enable/Disable TDC.
– Options available: Enabled/Disabled. Default setting is
Enabled.

TDC Current Limit
– Sets a value for TDC current Limit which is dened in 1/8A
increments. The range is 0-32767. Default setting is 0.

TDC Time Window
– Options available: 1ms, 2ms, 3ms, 4ms, 5ms, 6ms, 7ms,
8ms, 9ms, 10ms. Default setting is 1ms.

TDC Lock
– Enable/Disable TDC Lock.
– Options available: Enabled/Disabled. Default setting is
Disabled.
VR Mailbox Command options
VR mailbox commands to send, 1:MPS VR cmd, 2:PS4 Exit VR
cmd, 4:MPS VR Decay cmd. It can select multiple commands by
entering sum of values of each command.