To Next Page

To Previous Page

- 77 - BIOS Setup

Parameter

Description

System Event Log

System Errors

Enable/Disable system error logging function.

Options available: Enable/Disable. Default setting is Enable.

S/W Error Injection Support

When enabled, software error injection is supported by unlocking MSR

0x790.

Options available: Enable/Disable. Default setting is Disable.

System Memory Poison

Enable/Disable system memory poison function.

Options available: Enable/Disable. Default setting is Enable.

Viral Status

Enable/Disable viral function.

Options available: Enable/Disable. Default setting is Enable.

Clear Viral Status

Enable/Disable clear viral function.

Options available: Enable/Disable. Default setting is Disable.

System Cloaking

When Enabled system cloaking function, corrected and UCNA errors are

masked from OS/SW visibility.

Options available: Enable/Disable. Default setting is Disable.

UboxToPcuMca Enabling

Enable/Disable system to report Ubox local errors to MCA.

Options available: Enable/Disable. Default setting is Enable.

CATERR->GPIO->SMI

Enable/Disable PCH GPIO to trigger SMI on CATERR.

Options available: Enable/Disable. Default setting is Disable.

FatalErrDebugHalt

Debug loop for McBank Fatal error case ONLY.

Warning: Enable this knob only in conjuction with ITP as thread will halt in

Fatal error ow.

Options available: Enable/Disable. Default setting is Disable.

eMCA Settings