17
Making internal calls
If no internal participant answers or the line
is busy, press the k key again to return to
the external
call.
Internal consultation/
conference calls
When you are conducting an
external call,
you can call an internal participant at the
same time for consultation or hold a
conference call between all 3 participants.
You are conducting an e
xternal call:
Pr
ess the key to page all
registered handsets.
The external participant is put on hold.
The connection will be established with the
first answering
handset for consultation.
Either:
Press the key.
You are reconnected with the
ex
ternal part
icipant.
Or:
Press and hold the key.
All 3 participants are connected
with each other
.
Ending a conference call
Q Replace the receiver.
If an internal participant ends the call, the
other remains connected to the external
participant.
Accepting/rejecting call
waiting
I
f you receive an external call during an
internal call, you will hear the call waiting
tone (short tone). The caller's number will
appear in the display if Calling Line
Identification is enabled.
Accepting the external call
Either:
m Press the speaker key if you are
conducting the internal call via
the receiver.
P
L
ift the receiver if you are
conducting the internal call
via speaker.
Th
e internal call is ended and you are
connected to the external caller.
Or:
Press the key to answer the call
and put the intern
al participant
on hold.
Press again to toggle between the
e
xter-nal and the internal participant.
Rejecting the external call
I
gnore the call waiting. You remain
connected with the internal participant.
The ringtone can still be heard on other
registered handsets.
Please note
C
onferences are only possible
between one external and two internal
participants.
To Next Page
