Proper programming check
Insert the brown key, disabling the transponder (i.e., by tilting the key hood by 90°),
and turn the key to the «ON» position. Perform the engine start-up operation. Ensure
that the engine does not start. Insert the red key and start up again. Check that engine
starts.
WARNING
IF THE ENGINE STARTS WITH THE BROWN KEY (AND WITH A DISABLED
TRANSPONDER) OR IF DURING THE PROGRAMMING A WRONG STEP HAS
BEEN CARRIED OUT, IT IS NECESSARY TO REPEAT THE PROCESS FROM THE
BEGINNING.
01_15
Fuel tank (01_15)
Tilt up the lock protection cover; Insert the key and turn it counter-clockwise, then pull
out the cover.
20
To Next Page
Loading...
