Gintec G30 - Connector; Bluetooth Connection

G30 GNSS Receiver User Manual
- 10 -
§2.3.3 Connector
Connector of P9III controller
Function description of connector
No.
Port
Description
①
USB Type-C
To charge device and transmit data. Support USB OTG.
②
TF card slot
To install TF card.
§2.3.4 Bluetooth Connection
Start the G30 first, and then use P9III controller to perform the following operations:
1. Open SurPad/Create Yours software and click "Communication" to enter the connection