Gintec G30 - UHF Radio Antenna; TYPE - C Cable

G30 GNSS Receiver User Manual
- 12 -
While charging, when the power indicator is red, it means charging; when the indicator is
green, it means full.
Power adapter and charging cable:
§2.4.3 UHF Radio Antenna
UHF radio antennas are required for the built-in radio Base mode and the built-in radio
Rover mode.
§2.4.4 TYPE - C Cable
TYPE - C cable is to connect the G30 with computer, used for transmission of static data or
receiver firmware upgrading.