Gintec G10 User Manual

G10
G10 Multifunctional survey GNSS Receiver
User Manual
Copyright Guangzhou Geosurv Information Technology Co., Ltd
*All Right Reserved

Gintec G10 Specifications

General

Brand	Gintec
Model	G10
Category	Receiver
Language	English

Summary

Chapter 2 G10 Survey System

2.1 G10 mainframe

2.1.1 Front side of the mainframe

2.1.2 Back side of the mainframe

2.1.3 The bottom of receiver

2.2 Basic operation of G10

Covers fundamental operations like powering on/off, self-checking, and work station checks.

2.2.1 Power on/off

Instructions on how to power the G10 receiver on and off.

2.2.2 Self-checking

2.2.3 Check work station

2.2.4 Switch work mode and datalink

Procedure for switching the work mode and datalink on the G10 receiver.

2.3 WEB UI function

Explains how to use the Web User Interface for device configuration and control.

2.3.1 Status

2.3.2 Information

2.3.3 Download

2.3.4 Management

How to manage firmware, registration, and settings via the WEB UI.

2.3.5 Settings

Guide to configuring various settings like working mode and device options via WEB UI.

2.4 Device Register

2.4.1 Register via WEB UI

2.4.2 Register via Controller

2.5 Upgrade firmware

Instructions on how to upgrade the G10 receiver's firmware.

2.6 Measure the antenna height

Chapter 3 Standard Accessories

Chapter 4 Tilt Survey

4.1 Activate tilt survey function

Steps to enable the tilt survey functionality on the G10 receiver.

4.2 Sensor Calibrate

Instructions for calibrating the tilt sensor for accurate measurements.