Gintec G30 - Page 29

G30 GNSS Receiver User Manual
- 26 -
Temperature
Operating: –25 °C~+65 °C
Storage: –35 °C~+80 °C
Humidity
100% Non-condensing
Protection
IP68
Shock
Withstand 2 meters pole drop
Power and
Battery
Power Supply
6-28V DC, overvoltage protection
Battery
Internal Li-on, 6800mAh, 7.2V
Communicati
ons
I/O port
5PIN LEMO (External power port + RS232)
Type-C port（Charging and data transmission）
1 radio antenna interface
Micro SIM card slot
Wireless modem
Built-in radio, 1W, typically work range: 8KM
Frequency Range: 410-470MHz
Communication Protocol: SOUTH, Farlink,
TrimTalk, Hi-target, HUACE, Satel
4G
LTE FDD: B1/B3/B5/B7/B8/B20
LTE TDD: B38/B40/B41
WCDMA: B1/B5/B8
GSM: 850/900/1800/1900MHz
Double Module
Bluetooth
Bluetooth 3.0/4.1
Bluetooth 2.1 + EDR standard
NFC
Support
WiFi
802.11 b/g standard
WIFI data link
To work as the datalink that receiver can broadcast
and receive differential data via WIFI
Data storage/
Transmission
Data Storage
4GB internal storage,
Changeable record interval, up to 20Hz raw data
collection
Data Transmission
USB data transmission, supporting FTP/HTTP data
download
Data Format
Differential data format: CMR, sCMRx, RTCM
2.1, RTCM 2.3, RTCM 3.0, RTCM 3.1, RTCM 3.2
GPS output data format: NMEA 0183, PJK plane
coordinates, Binary code
Network model support: VRS, FKP, MAC, fully
support NTRIP protocol