Type-c interface design and PD fast charging scheme make charging and transmission more
convenient and efficient
➢ All constellation all frequency point
Full constellation full frequency point reception, fully support Beidou third generation satellites,
support ups to 16 frequency signal calculation.
➢ Built-in radio with high performance
Built-in transceiver integrated radio, working frequency 410-470MHZ, Trim talk 450s,
TrimMarkIII, SOUTH, CHC, SATEL, HI-TARGET are all compatible. The “Farlink” protocol
perfectly solves the problem of large data volume of multiple constellations transmission. And the
power consumption can reduce about 60% in the same amount of data transmission compare to
the traditional RTK, increase the sensitivity and efficiency of radio signal, achieve the typical
working range as 5km operation, and meet the needs of customers for small and medium scale.
➢ Smart locking to base station
Based on Farlink "instant" protocol, one-to-one signal tracking and locking technology can realize
the continuous tracking and locking of the target base station signal, and effectively eliminate
crosstalk and interference.
➢ Inertial tilt measurement
Built-in IMU inertial measurement sensor, with 0° ~ 60° super-large angle, 200HZ ultra-high
update rate, can automatically correct the coordinates according to the tilt direction and Angle of
the centering bar, the user does not need to strictly be centering, lifting the bar to measure.
➢ Base station movement alert
Built-in IMU sensor can always read the attitude information, when the base station movement,
tipping can accurately judge and remind.
➢ Double backup of data:
Field measurement data can be stored in the book and the host at the same time to realize double
backup and effectively avoid data loss.
➢ PPP function optional
To Next Page
Loading...
