Globalstar SmartOne C - Hysteresis Configuration; Setting Hysteresis Value

To Next Page

To Previous Page

Page 15

SmartOne C User Manual Conﬁdential & Proprietary Information

9100-0410-01 R2.4

• Hysteresis Conﬁguration

The SmartOne C device can be conﬁgured with a custom hysteresis value. The conﬁguration software

program can set the SmartOne C with a hysteresis value for either 0 or 5 minutes. Setting hysteresis to

0 minutes may result in aborting conﬁgured input status change or undesired state messages.