INFORMATION SIGNALS
Compliance
Certifications: CE MDD certificate.
The sound and acoustic signals are in compliance with the 60601-1-8 directive.
Meaning of the signal "Electrode error"
If one or more cables are not duly connected to the mains, or if cables for microcurrent
are erroneously used to run an EMS program, the following signal will appear on the
display: "Electrodes error".
PREPARATION TO THE USE OF THE DEVICE
For maximum safety, the device must be used following the rules and the limitations of
the user manual.
The manufacturer declines all responsibility with reference to a different use from what
is indicated in this manual.
The full or partial reproduction in any form and by any electronic or mechanical means of
the texts and/or pictures contained in this manual without the written authorization of
the manufacturer is forbidden.
Treatments should not be performed on skin lesions.
If the package, the cable or the connector of the power supply show signs of wear or
damage, replace it instantly.
The device should be connected to the mains with its power supply; before doing so,
make sure that the power system complies with the directives in force in your country.
Make sure that the power supply will be easily unplugged.
The use of muscle stimulation programs referred to the treatment of urinary
incontinence can be used exclusively for the treatment of urge, stress and mixed
incontinence.
Warnings before the use
Do not use this device simultaneously with other electronic devices, especially if they
maintain vital functions. In case it is necessary to use the device nearby or on other
devices, make sure it works properly, please refer to the chapter EMC accompanying
documents.
- It is recommended to read carefully the entire operating manual before using the unit;
keep carefully this operating manual.
To Next Page
Loading...
