EasyManua.ls Logo

Globus PREMIUM 400 - MAINTENANCE AND CLEANING; Device Maintenance Procedures

Globus PREMIUM 400
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PREMIUM 400
REV 4_26.4.22
47
It is crucial to know if the active part of the medicine, after being dissociated in a ionic
form, has positive or negative charge, with the aim of placing it correctly according to
the direction of the electric flow.
The ions of the medicinal substance are transmitted inside the organism through
cutaneous areas that oppose a low resistance to the current, reaching the cellular
membranes that are thereby electrically modified.
MAINTENANCE AND CLEANING
Device
- In case of actual or alleged malfunctioning, do not tamper with the device and do not
try to repair it by yourself.
- Do neither intervene on the device nor open it. Only specialized and authorized centers
can repair it.
- Avoid violent impacts that may damage the device and cause malfunctioning, also not
immediately detectable.
- Use this device in a dry and open environment. Do not wrap the device.
- Clean the device only by using disinfectant with sodium hypochlorite or quaternary
ammonium salt (percentage: 0.2-0.3%) diluted with distilled water. After
cleaning/disinfecting the device, dry it perfectly with a clean cloth.
- It is recommended to clean/disinfect the parts after every use, unless otherwise
indicated.
- Always use the device with clean hands.
- It is recommended to use the device in a clean environment to avoid contamination
with dust and dirt.
- It is recommended to use the device in a ventilated, well-aired space.
Battery
The device has a menu that allows to see the status of the battery charge, if the device
has one. The values displayed in this menu enable the manufacturer and/or the
authorized help center to check the status of the battery charge.
Accessories
Use and storage of the electrodes and the cables
If the cables or the electrodes are damaged, they should be replaced and not used
anymore.

Related product manuals