Raise the rear of the seat by raising the rear edge of
the
button. Lower the rear of the seat by lowering the rear
edge
of
the button. Move the seat rearward by moving
the whole button toward the
rear
of
the
vehicle.
Moving the whole button up or down raises or lowers
the whole seat.
Vertical
Control:
Move the reclining front seatback
rearward by moving the button toward the rear of the
vehicle. Move the seatback forward by moving the
button toward the front of the vehicle.
Power
Lumbar
Control
(If
Equipped)
If
you have this control, it
is
located
on
the side
of
the
driver’s seat.
Press and hold
the
front
of
the control until you have
the
desired lumbar
support.
To
decrease lumbar
support,
press and hold the rear of the control.
To Next Page
Loading...
