Adjusting the Speakers
BAL:
Turn the control behind the upper knob to move
the sound to the
left
or right speakers. The middle
position balances the sound between the speakers.
FADE:
Turn the control behind the lower knob to move
the sound to the front or rear speakers. The middle
position balances the sound between the speakers.
Playing a Cassette Tape
Your tape player is built to work best with tapes that are
30
to
45
minutes long on each side. Tapes longer than
that are
so
thin
they may not work well in this player.
Once the tape is playing, use the knobs for VOLUME,
BAL FADE, BASS and
TREB
just as you do for
the radio.
REV:
Press the SEEK left arrow to reverse the cassette
tape. Press the SEEK right arrow to stop reversing
the tape.
FWD:
Press the SEEK right arrow to advance the
cassette tape. Press the SEEK left arrow to stop
forwarding the tape.
RECALL:
Press this knob to switch tape sides.
EJECT:
Press this button to remove the tape or stop the
’
tape and play the radio.
I
I
CLN:
If this message appears
on
the display, the
~
cassette tape player needs to be cleaned. It will still play
~
tapes, but you should clean it as soon as possible to
prevent damage to the tapes and player. See “Care of
Your Cassette Tape Player’’ in the Index. After you clean
~
the player, press and hold EJECT for five seconds to
reset the CLN indicator. The radio will display
---
to
show the indicator was reset.
I
To Next Page
Loading...
