To
return the head restraints to
the
upright position,
reach behind
the
seats and pull the head restraint up
until
it locks into position.
On two-door models with an inside mounted spare tire,
the
driver’s side rear seat head restraint must be lifted
and held upright as the seatback
is
raised. Otherwise, the
head restraint
will
hit the spare tire and prevent the
seatback from properly latching.
Push and pull
on
the head restraints to check that they
have locked
in
the upright position.
If
they haven’t, have
them fixed immediately.
The rear seat head restraints are adjustable. Push the
button located under the head restraint to raise or lower
it. Slide the head restraint up or down
so
that
the
top
of
the
head restraint
is
closest
to
the
top of your ears. After
releasing the button, push and pull on the head restraint
to make sure it’s locked
in
place.
1-9
To Next Page
Loading...
