4.
Then
fill
the coolant recovery tank
to
ADD
mark.
5.
Put the cap back on the coolant recovery tank, but
leave the pressure cap off.
6.
Start the engine and let
it
run until
you
can feel the
upper radiator hose getting hot. Watch
out
for the
engine cooling fan.
7.
By
this time, the coolant level inside the radiator
filler neck may
be
lower. If the level is lower, add
more
of
the proper
DEX-COOL@
coolant mixture
through the filler neck
until
the level reaches the
base
of
the filler neck.
5-19
To Next Page
Loading...
