INTRODUCTION
2005 Tech 2 User’s Guide I - 1
Using This Manual
To increase their effectiveness with the Tech 2, users should familiarize themselves with the format and
information contained in this guide.
Vehicle System Familiarity
While the Tech 2 is a powerful tool, it cannot replace knowledge and skill. To obtain maximum benefit from
the Tech 2, service technicians must have a complete understanding of vehicle systems.
When using the Tech 2 to diagnose a vehicle, it is recommended that service technicians also refer to the
service manual and the latest service bulletins.
Disclaimer
The Tech 2 is designed for use by trained service personnel only. It has been developed for the sole
purpose of diagnosing and repairing automotive systems with electronic controls and interfaces.
Every attempt has been made to provide complete and accurate technical information based on factory
service information available at the time of publication. However, the right is reserved to make changes at
any time without notice.
IMPORTANT
Tech 2 figures and illustrations are hyperlinked to the text of this manual. To view a figure, simply click
on its description, which is shown in blue text. After viewing the figure, click on the rainbow-colored
arrow at the lower left-hand corner of the screen to return to your place in the manual.
To Next Page
Loading...