GMC Tech 2 - Print Icon Selected on Snapshot Toolbar

SECTION VIIB TIS SOFTWARE
2005 Tech 2 User’s Guide VII - 35
Printing a Snapshot
Printing can be accomplished in three ways:
1. Using the “Print” command in the File menu (Figure VIIB-32),
2. Using the “Print screendump” icon on the TIS toolbar (Figure VIIB-33),
3. Using the “Print” icon on the snapshot toolbar (Figure VIIB-34).
The “Print” commands produce a text listing of data parameters. The “Print screendump” icon produces a
full-page representation of what’s displayed on the monitor.
Figure VIIB-32
“Print” command selected from the File menu
Figure VIIB-33
“Prints a screendump” icon selected on TIS toolbar
Figure VIIB-34
“Print” icon selected on Snapshot toolbar
RETURN TO MAIN MENU