EasyManua.ls Logo

GME TX6165 - Menu Options; Using the Menu; Duplex Mode Selection

GME TX6165
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TX6165 INSTRUCTION MANUAL
22
MENU OPTIONS
The Menu key is used to adjust the various feature settings. The following chart shows the order of
these selections.
No. Description No. Description
1 Duplex (channels 1 – 8 and 41 – 48 only) 9 Roger Beep Setting O/On
2 CTCSS and DCS Selection Gbl/Ind 10 Button Beep Selection O/On
3 CTCSS and DCS Code Selection 11 Call Alarm Selection 1-5
4 Transmitter Power Hi/Lo 12 Triple Watch Channel 1-80
5 Compander O/On/Auto 13 Squelch Tail O/On
6 Scrambler Setting O/On 14 Power Save O/On
7 VOX setting 1-3 15 Receive LCD Backlight O/On
8 Squelch Level Setting 1-5/Auto 16 Programmable Button Menu
Note: The Duplex menu option will only appear when channels 1 – 8 or 41 – 48 are selected. DTCSS/
DCS, transmit power and voice scrambler settings are inhibited on channels 5/35 (emergency channel).
USING THE MENU
To access the menu, press and hold the Menu key until the radio beeps. Menu options will
appear in the order listed above.
To step to the next menu item, press the Menu key again.
To change options in selected menu, press the or keys.
To store your selection and exit menu, press the PTT switch.
To access the Programmable Button Menu, press and hold the Menu key until the radio beeps or when
the sub menu is entered when the ProG is displayed.
DUPLEX MODE SELECTION
The Duplex option only appears in the Menu if a repeater channel (1 – 8 or 41 – 48) is selected prior to
entering the menu.
To enable duplex on the selected repeater channel:
1. Select a repeater channel 1 – 8 or 41 – 48 using the or keys.
2. Press and hold the Menu key until the radio beeps. The
icon will ash.
3. Press the or keys to toggle ‘on’ (duplex enabled) or ‘oFF’ (duplex disabled) on the
display.
4. Press the PTT switch to store your setting and exit the Menu.
When Duplex is enabled on a repeater channel, the
icon will be displayed on that channel.

Related product manuals