TX6165 INSTRUCTION MANUAL
8
FEATURES
† Refer the preface for important information concerning the UHF CB radio.
Feature Description
Transmit (TX)
TX6165 - 5/1 Watt RF Power: Selectable transmitter power allows
you to conserve battery power when transmitting in close range by
using the Low Power setting.
Individually programmable Duplex function: User selectable for only
those individual channels in your area that have repeaters, leaving
others free for use as extra simplex channels.
Receive (RX)
80
†
channels 477 MHz UHF CB.
Power Save feature: Conserves battery power by sleeping during
periods of inactivity.
Calling Tone and Roger Beep: Alerts you to incoming calls.
Signal receive indicator.
Scanning and Memory
Functions
Microprocessor controlled frequency synthesiser: Allows user
programmable control of scanning, channel memories and selected
feature options.
Programmable scan function: Scans up to 80 UHF CB channels.
Dual Watch: Scans two channels, working and priority.
Triple Watch: Scans three channels, working, priority and menu
selected Triple Watch channel.
Privacy Functions
Voice Inversion Scrambler: A simple voice scrambler that, when
activated, will make your transmission and reception intelligible only
to other radios using the same scrambler technology.
CTCSS & DCS: A built-in Continuous Tone Coded Squelch System and
a Digital Coded Squelch option provide quiet channel operation.
Physical Properties
Water & Dust proof IP67: Provides protection against dust and
temporary immersion in water.
Removable exible antenna.
Rugged construction with Die-cast Chassis.
User Controls and Interface
Keypad Lock: Prevents accidental button presses.
Backlit LCD: For night viewing.
Waterproof/Dustproof speaker microphone - Rated IP67.