GME TX6165 - Roger Beep Tone; Button Beep; Call Alarm Selection

27
TX6165 INSTRUCTION MANUAL
ROGER BEEP TONE
The Roger Beep is a tone that is automatically transmitted whenever the PTT is released. This tone
serves to alert the receiving party that your transmission has ended.
To enable or disable the roger beep tone:
1. Press and hold the Menu key until the radio beeps.
2. Press the Menu key repeatedly ‘RG’ is displayed. The icon will be ashing.
3. Press the or keys to select ‘on’ or ‘oFF’.
4. Press the PTT switch to conrm and store your selection. When the roger beep tone is
enabled, the icon is displayed.
BUTTON BEEP
The Button Beep allows the radio to sound a conrmation beep whenever the keys are pressed.
To turn the button beep on or o:
1. Press and hold the Menu key until the radio beeps.
2. Press the Menu key repeatedly until ‘BP’ is displayed. The icon will be ashing.
3. Press the or keys to select ‘on’ or ‘oFF’.
4. Press the PTT switch to conrm and store your selection.
When the Button Beep is enabled the icon will be displayed and a beep will be heard whenever a key
is pressed.
CALL ALARM SELECTION
The radio provides 5 user-selectable Call Alarm melodies to alert other users to your incoming call. When
enabled, the melody can be transmitted to another user where it will be heard in the speaker of the
receiving radio.
To select your favourite call alarm melody:
1. Press and hold the Menu key until the radio beeps.
2. Press the Menu key repeatedly until ‘CL’ is displayed. Call number 1 – 5 or ‘oFF’ will be
ashing.
3. Press the or keys to preview (listen to) the 5 available Call Melodies (1 – 5).
4. To disable the call melodies, select ‘oFF’. Press the PTT switch to conrm and store your
selection.