GME TX667 - Dual Watch Functionality; Setting Up Dual Watch Mode; Dual Watch Operation Guide

TX667 Instruction Manual
32
DUAL WATCH
The Dual Watch mode lets you to monitor two channels at the same time. While
in dual watch mode, the unit will monitor both the selected channel and a second
dual watch channel.
To set the dual watch mode:
1. Hold the Menu key for 2 seconds. The channel number will ash.
2. Use the  or  keys to choose the selected channel.
3. Press the Menu key repeatedly until ‘dU’ is displayed. The
TX677 Instrucon Manual
12 June 2018
© 2018 Standard Communicaons Pty Ltd trading as GME. All rights reserved.
28
50157
Content
To send the Call Alarm Melody:
Press the PTT switch twice quickly. The icon will appear and the LED indicator will light red for a
few seconds as the melody is sent. The melody will be heard in the speaker of the receiving radio.
The Call Alarm can only be sent once per minute.
Dual Watch
The Dual Watch mode lets you to monitor two channels at the same me. While in dual watch
mode, the unit will monitor both the selected channel and a second dual watch channel.
To set the dual watch mode:
1. Use the or keys to choose the selected channel.
2. Press and hold the Menu key unl the radio beeps.
3. Press the Menu key repeatedly unl ‘dU’ is displayed. The
icon will be ashing.
4. Press the or keys to select the second ‘dual watch’ channel or select ‘oF’ to disable
the dual watch mode.
5. Press the PTT switch to conrm and store your selecon.
While dual watch is acve, the
icon and LCD will alternate between the selected channel and the
dual watch channel.
Dual Watch Operaon
• If a signal is received on either channel, the radio will pause on that channel for as long
as it remains busy, then resume the Dual Watch 5 seconds aer the last transmission has
ceased.
• To talk on the dual watch channel, press the PTT switch while the radio is paused on that
channel then talk in the usual way.
• To talk on the selected channel, press the PTT switch while no signals are being received.
The radio will switch to the selected channel. When you have nished your conversaon
the radio will resume the Dual Watch 5 seconds aer the last transmission has ceased.
To stop Dual Watch, briey press the Menu key followed by the key. This is equivalent to selecng
‘oF’ in the Dual Watch menu seng.
icon
will be ashing.
4. Press the  or  keys to select the second ‘dual watch’ channel
or select ‘oF’ to disable the dual watch mode.
5. Press the PTT switch to conrm and store your selection.
While dual watch is active, the
TX677 Instrucon Manual
12 June 2018
© 2018 Standard Communicaons Pty Ltd trading as GME. All rights reserved.
28
50157
Content
To send the Call Alarm Melody:
Press the PTT switch twice quickly. The icon will appear and the LED indicator will light red for a
few seconds as the melody is sent. The melody will be heard in the speaker of the receiving radio.
The Call Alarm can only be sent once per minute.
Dual Watch
The Dual Watch mode lets you to monitor two channels at the same me. While in dual watch
mode, the unit will monitor both the selected channel and a second dual watch channel.
To set the dual watch mode:
1. Use the or keys to choose the selected channel.
2. Press and hold the Menu key unl the radio beeps.
3. Press the Menu key repeatedly unl ‘dU’ is displayed. The
icon will be ashing.
4. Press the or keys to select the second ‘dual watch’ channel or select ‘oF’ to disable
the dual watch mode.
5. Press the PTT switch to conrm and store your selecon.
While dual watch is acve, the
icon and LCD will alternate between the selected channel and the
dual watch channel.
Dual Watch Operaon
• If a signal is received on either channel, the radio will pause on that channel for as long
as it remains busy, then resume the Dual Watch 5 seconds aer the last transmission has
ceased.
• To talk on the dual watch channel, press the PTT switch while the radio is paused on that
channel then talk in the usual way.
• To talk on the selected channel, press the PTT switch while no signals are being received.
The radio will switch to the selected channel. When you have nished your conversaon
the radio will resume the Dual Watch 5 seconds aer the last transmission has ceased.
To stop Dual Watch, briey press the Menu key followed by the key. This is equivalent to selecng
‘oF’ in the Dual Watch menu seng.
icon and LCD will alternate between the
selected channel and the dual watch channel.
To cancel the dual watch, briey press the Menu key followed by the  key.
This is equivalent to selecting ‘oF’ in the dual watch menu setting.
DUAL WATCH OPERATION
• If a signal is received on either channel, the radio will pause on that
channel for as long as it remains busy, then resume the Dual Watch 5
seconds after the last transmission has ceased.
• To talk on the dual watch channel, press the PTT switch while the radio
is paused on that channel then talk in the usual way.
• To talk on the selected channel, press the PTT switch while no signals
are being received. The radio will switch to the selected channel. When
you have nished your conversation the radio will resume the Dual
Watch 5 seconds after the last transmission has ceased.
To stop Dual Watch, briey press the Menu key followed by the  key. This is
equivalent to selecting ‘oF’ in the Dual Watch menu setting.