go-e Charger Gemini - Product Overview; Scope of Delivery

1010 1111
Connection cable
direct connection to a junction box possible
RFID chip
Release of charging processes (can be activated via app)
Reset card
Required for using the app and for resetting the charger to
factory settings
Housing
Impact-resistant and UV-resistant high-performance plastic
RFID reader
Release of charging processes with RFID chips or cards
(can be activated via app)
Button
Change of charging strength (5 levels - adjustable via app)
LED ring
Display of charging strength (1 LED = 1 ampere) and char-
ging status
Rating plate
With serial number of the charger
Sealed screws
Opening leads to loss of guaranty/warranty
Type 2 socket
Connection for type 2 plug of the charging cable
(with weather protection)
Back
c
d
e
g
f
h
i
j
i
j
a
b
a
b
d
e
f
g
h
c
11 or 22 kW charging box
with 1,8 metres connection cable
Wall bracket
Mounting material
5x Dowel 8 x 40 mm
4x Screws for wall bracket 4.5 x 50 mm
1x Screw for U-piece 4 x 50 mm
1x U-piece (optional anti-theft device)
• go-e Controller
• go-e Case
• go-e Tower or go-e Pedestral
• Type 2 cable (up to 22 kW) 2.5 m | 5 m | 7.5 m
• Type 2 cable holder
• RFID chips, pack of 10
• Additional go-e Charger wall bracket
RFID chip
Reset card
4x 1x5x 1x
Optional accessories
Installation and operating manual go-e Charger Gemini / go-e Charger Gemini 2.0 | V 1.0Installation and operating manual go-e Charger Gemini / go-e Charger Gemini 2.0 | V 1.0
5. Product overview
6. Scope of delivery