[page 6] | gpelectric.com
GETTING STARTED
When in normal mode, the back-light of the GP-BMK-50 switches o after no key has been pressed for 60 seconds.
Press any key to restore the back-light. Go Power disclaims liability for any direct, indirect or incidental damages
caused by, or in case of, installation not performed following the instructions and cautions in this manual. Go Power
will refuse requests for exchanges or returns, resulting from the purchase and installation of items which do not
comply with local codes. To avoid such concerns Go Power recommends installation by a professional electrician,
RV or marine, or solar technician. Examples that are shown within this manual are for illustrative purposes only.
2.3 IMPORTANT COMBINED BUTTON FUNCTIONS
a) Restore factory settings
Press and hold SETUP and SELECT simultaneously for 3 seconds.
b) Manual synchronization
Press and hold the up and down buttons simultaneously for 3 seconds.
c) Silence audible alarm
An alarm is acknowledged when any button is pressed, however, the alarm icon is displayed as long as the alarm
condition remains.
GET REAL-TIME DATA DISPLAYED ON A SMART PHONE
With the GP-BTD (Go Power! Battery Monitor Dongle), real-time data and alarms can be
displayed on Apple and Android smart phones, tables and other devices.
You will need to download the free Go Power! Connect
TM
app from Google Play or the Apple Store.
To Next Page
Loading...
Need help?
General
