Go Power MPPT-PRO Series User Manual

gpelectric.com | [page 15]
QUICK FLASH
(cycle of 0.2s with on and o󰀨 each lasting for 0.1s)
EQUALIZE CHARGING
DOUBLE FLASH
(cycle of 2s with on for 0.1s, o󰀨 for 0.1s, on again for 0.1s, and o󰀨 again for 1.7s)
CURRENT LIMITING
OFF NO CHARGE
5.1.2 BATTERY INDICATOR
LED PATTERN STATUS
STEADY ON NORMAL BATTERY CHARGE
SLOW FLASH
(cycle of 2s with on and o󰀨 each lasting for 1s)
BATTERY OVER-DISCHARGED
QUICK FLASH
(cycle of 0.2s with on and o󰀨 each lasting for 0.1s)
BATTERY OVER-VOLTAGE
5.1.3 LOAD INDICATOR
LED PATTERN STATUS
OFF LOAD TURNED OFF
QUICK FLASH
(cycle of 0.2s with on and o󰀨 each lasting for 0.1s)
LOAD OVER-LOADED/SHORT-CIRCUITED
STEADY ON LOAD FUNCTIONING NORMALLY
5.1.4 ERROR INDICATOR
LED PATTERN STATUS
OFF SYSTEM OPERATING NORMALLY
STEADY ON SYSTEM MALFUNCTIONING
STATUS DISPLAY

Go Power MPPT-PRO Series Specifications

General

Brand	Go Power
Model	MPPT-PRO Series
Category	Controller
Language	English