19
DT2 / DT4 series User Manual
4-2. The interface of NetSetting
Click the NetSetting icon to start the program; you will see the start page as below. The
start page will display the basic information of connected printer and your PC.
Click the magnifier icon to search the Godex printers which are connected via Ethernet
port in you network environment. Once a connected Godex printer is detected, it will
be listed on the start page.
There are six tabs on the top of interface which can configure different types of network
settings. But for the data security reason, you need correct password to enter the
configuration pages.
【
Note
】
The default password is “1111”, you can change the password later from the “IP Setting”
tab.
To Next Page
Loading...
