EasyManua.ls Logo

Godox AD200Pro - Lithium Battery; Lithium Battery Features and Cautions; Battery Level Indication; Modeling Lamp Function

Godox AD200Pro
136 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
Lithium Battery
Features
1. This flash unit uses Li-ion polymer battery which has long runtime. The Available
charge-and-discharge times are 500.
2. It is reliably safe. The inner circuit is against overcharge, over discharge,
overcurrent, and short circuit.
3. Take only 4 hours to fully charge the battery by using the standard battery
charger.
Cautions
Do not short circuit
Do not expose to rain or immerse into water. This battery is not waterproof.
Keep out of reach of children.
No over 24 hours continuous charging.
Store in dry, cool ventilated places.
Do not put aside or into fire.
Dead batteries should be disposed according to local regulations.
Long-time not to use, please charge it to 60% and then placed.
If the battery has ceased using for over 3 moths, please make full recharge.
Battery Level Indication
Make sure the battery pack is securely loaded in the flash. Check the battery level
indication on the AV panel to see the remaining battery level.
Battery Level
Indication on the AV
panel
Meaning
3 grids
Full battery
2 grids
Medium battery
1 grid
Low battery
Blank grid
Lower battery, please recharge it
Blinking
The battery level is going to be used out immediately. And
the flash will auto power off in 1 minute.
Note: Please recharge the battery as soon s possible (within
10 days). Then, the battery can be used or be placed for
long period.
Modeling Lamp
With only the speedlite flash head have modeling lamp function, it will automatic turn
off after 30 minutes. Short press the modeling lamp button will control the modeling
lamp turn on or off.

Related product manuals