Godox AD200Pro - High-Speed Sync (HSS); Manual Flash Mode (M)

13
High-Speed Sync
Hight Speed Sync (FP flash) enables the flash to synchronize with all camera shutter
speeds. This is convenient when you want to use aperture priority for fill-flash portraits.
Long Press Function Button < > for 2
seconds so that < > is displayed.
Please use the X1 series transmitter to
trigger.
• With high-speed sync, the faster the shutter speed, the shorter the effective flash
range.
• Multi flash mode cannot be set in hight-speed sync mode.
• Over-temperature protection may be activated after 20 consecutive high-speed
sync flashes.
Flash Mode – M: Manual Flash
The flash output is adjustable from 1/1 full power to 1/256
th
power in 1/10
th
stop
increments. To obtain a correct flash exposure, use a hand-held flash meter to
determine the required flash output.
Press <MODE> button so
that <M> is displayed.
Turn the Select Dial to
choose a desired flash
output amount.
Press <SET> button again
to confirm the setting.