Godox AD200Pro - Other Protection Features

23
Number of flashes that will activate over-temperature protection in high-speed sync
triggering mode:
Power Output
Times
Speedlite flash head
Bare bulb flash head
1/1
20
50
1/2 (+0.3+0.7)
30
60
1/4(+0.3+0.7)
50
75
1/8(+0.3+0.7)
75
100
1/16(+0.3+0.7)
80
150
1/32(+0.3+0.7)
100
200
1/64(+0.3+0.7)
1/128(+0.3+0.7)
1/256(+0.3+0.7)
Other Protections
• The system provides real-time protection to secure the device and your safety.
The following lists prompts for your reference:
Prompts on
LCD Panel
Meaning
E1
A failure occurs on the recycling system so that the flash cannot fire.
Please restart the flash unit. If the problem still exists, please send
this product to a maintenance centre.
E2
The system gets excessive heat. Please allow a rest time of 10
minutes.
E3
The voltage on two outlets of the flash tube is too high. Please send
this product to a maintenance centre.
E9
There are some errors occurred during the upgrading process.
Please using the correct firmware upgrade method.