40
Positioning and Operation Range (Example of wireless flash
shooting)
Auto Flash Shooting with One Receiver Unit
Transmission distance is about 100m
1. Before shooting, perform a test flash and test shooting.
2. The transmission distance might be shorter depending on the conditions such as
positioning of receiver units, the surrounding environment and whether conditions.
Note：
Auto Flash Shooting with Multiple Receiver Groups
You can divide the receiver units into two or three groups and perform E-TTL
II auto flash while changing the flash ratio (flash output ratio). In addition, you
can set and shoot with a different flash mode for each ring group, for up to 4
groups.
Auto Flash Shooting with Two Receiver Groups
Auto Flash Shooting with Three Receiver Groups
To Next Page
Loading...
