GOEBEL GO-RN2 - User Manual

innovative fastener solutions
GO - RN1
GO - RN2
GO - SN1
Cordless Blind Rivet Nut Battery Tool
User Manual

Summary

Safety Precautions

Use of the battery

Use of the charger

Tool Maintenance and Repair

1. Tool Overview

1.1 Capacity and Technical Parameters

1.2 Configuration and Accessories

2. Preparation of the Tool

2.1 Exchange of the Mandrels

2.2 Adjustment of the Mandrel

2.4 Checking the Tool

3. Function Setting

3.1 Adjusting the Traction Force

How to set the pulling force (low/high) for different rivet nut applications.

3.2 Setting the Stroke

Guide to adjust the tool's stroke length (1-10) for optimal riveting performance.

3.3 Setting the Riveting Mode

3.4 Riveting in Fully Automatic Mode

3.5 Riveting in Conventional Mode

4. Tool Operation

4.1 Presetting the Blind Rivet Nut

Steps for pre-testing and setting the tool for correct blind rivet nut installation.

4.2 Checking the Set Blind Rivet Nut

4.3 Unscrewing Blind Rivet Nuts Manually

4.4 Setting Instructions for Riveting Process

5. Charger & Battery

7. Troubleshooting

GOEBEL GO-RN2 Specifications