GOEBEL GO-RN2 - Default Chapter; Table of Contents

2 | Deutsch1 | English
Instruction manual: GO-RN1 / GO-RN2 / GO-SN1
Table of contents
www.goebelfasteners.com
Page
Safety precautions 2 - 4
Daily maintenance & environmental protection 4
1. Tools overview
1.1 Capacity
1.1 Technical parameters
1.2 Conguration/ Accessories (see g. A)
1.3 Part list (see Fig. B)
1.4 GO-RN series tool parts list
4
5
5
5 - 6
7
8
2. Preparation of the tool
2.1 Exchange of the mandrels
2.2 Setting the mandrel
2.3 Checking the battery
2.4 Checking the tool
9
9
9
10
11
3. Function setting
3.1 Adjusting the traction force
3.2 Adjusting the stroke
3.3 Setting the riveting mode
3.4 Riveting in fully automatic riveting mode
3.5 Riveting in conventional riveting mode
11
11
12 - 13
14
14
14
4. Tool Operation
(important tips before starting work)
4.1 Instructions for presetting the blind rivet nut
4.2 Checking the set blind rivet nut
4.3 Unscrewing blind rivet nuts manually
4.4 Setting instructions for the riveting process
4.5 Riveting in special applications
15
15
16
16
17
17
5. Charger & Batteries
5.1 Technical parameters
5.2 Use of the charger
5.3 Use of the battery
18
18
18
18
6. FAQ (Questions / Answers) 19
7. Troubleshooting
7.1 Malfunctions
7.2 Possible causes
7.3 Corrective measures
19
19
19
19
8. Protection conditions & CE certication 20